HSS RED
HSS RED, TiCN coated saw blade used in the cutting of mild & stainless steel. This coating gives the blade a better surface with 2200-2400HV hardness, that allows working at a cutting & feed speed faster than 50%, the low friction coefficient bringing an excellent cutting performance. Suitable to cut pipes & tubes in the following materials: mild steel, stainless steel, aluminium, brass, bronze & copper, etc.
| D (mm) | B (mm) | d (mm) | Z | Pin Hole |
|---|---|---|---|---|
| 250 | 1.2/1.6/2.0/2.5 | 32 | A/AW/B/BW | 2/8/45+2/11/63 |
| 275 | 1.0/1.2/1.6/2.0/2.5 | 32 | A/AW/B/BW | 2/8/45+2/11/63 |
| 300 | 1.2/1.6/2.0/2.5 | 32/40 | A/AW/B/BW/HZ | 2/8/45+2/11/63, 2/8/45+2/9/50+2/11/63 |
| 315 | 1.6/2.0/2.5 | 32/40 | A/AW/B/BW/HZ | 2/8/45+2/11/63, 2/8/45+2/9/50+2/11/63 |
| 325 | 1.6/2.0/2.5 | 32/40 | A/AW/B/BW/HZ | 2/8/45+2/11/63, 2/8/45+2/9/50+2/11/63 |
| 350 | 2.0/2.5/3.0 | 32/40 | A/AW/B/BW/CB | 2/8/45+2/11/63, 2/8/55+4/12/64 |
| 375 | 2.0/2.5/3.0 | 32/40/50 | A/AW/B/BW/CB | 2/8/45+2/11/63, 2/8/55+4/12/64 |
| 400 | 2.0/2.5/3.0A | 32/40/50 | A/AW/B/BW/CB | 2/8/45+2/11/63, 2/8/55+4/12/64 |
| 450 | 2.5/3.0 | 32/40/50 | A/AW/B/BW/CB | 4/15/80, 4/14/85+4/15/80 |
| 500 | 3.0/3.5 | 32/40/50 | A/AW/B/BW/CB | 4/15/80, 4/14/85+4/15/80 |